Replacing Hid Headlamp Bulbs; Replacing Stop/Tail/Turn And Sidemarker Lamp Bulbs; Replacing Backup Lamp Bulbs - Ford Taurus 2015 Owner's Manual

Hide thumbs Also See for Taurus 2015:

Table of Contents

3. Rotate the bulb socket counterclockwise and remove from the lamp

4. Carefully pull the bulb out of the socket and push in the new bulb.

Install the new bulbs in reverse order from the steps above.

Replacing HID headlamp bulbs (if equipped)

The headlamps on your vehicle use a "high intensity discharge" source.

These lamps operate at a high voltage. When the bulb is burned out, the

bulb and starter capsule assembly must be replaced by your authorized

Your vehicle is equipped with a tail lamp assembly containing integral

multiple light emitting diodes (LED) for the stop/tail/turn and sidemarker

functions. If replacement is required, see your authorized dealer.

1. Make sure the headlamp switch is in the off position.

Owners Guide gf, 2nd Printing, November 2014

Front parking lamp/turn

signal/sidemarker bulbs:

1. Make sure headlamp switch is in

the off position, then open the

2. Reach in behind the headlamp

assembly to access the bulb sockets

and connectors.

2. Remove the deck lid trim panel press pins

and carefully pull the panel away to expose

the backside of the backup lamp assembly.

Troubleshooting