Ford Taurus 2015 Owner's Manual page 26

Hide thumbs Also See for Taurus 2015:

Table of Contents

When installing a child safety seat with combination lap and shoulder belts:

• Use the correct safety belt buckle for that seating position.

• Insert the belt tongue into the proper buckle until you hear a snap and

feel it latch. Make sure the tongue is securely fastened in the buckle.

• Keep the buckle release button pointing up and away from the safety

seat, with the tongue between the child seat and the release button,

to prevent accidental unbuckling.

• Place the vehicle seat upon which the child seat will be installed in

the upright position.

• Put the safety belt in the automatic locking mode. See Step 5.

This vehicle does not require the use of a locking clip.

Perform the following steps when installing the child seat with

combination lap and shoulder belts:

Note: Although the child seat illustrated is a forward-facing child seat,

the steps are the same for installing a rear-facing child seat.

Owners Guide gf, 2nd Printing, November 2014

Child Safety

1. Position the child safety seat in

a seat with a combination lap and

shoulder belt.

2. Pull down on the shoulder belt

and then grasp the shoulder belt

and lap belt together.

Troubleshooting