Sennheiser evolution D1 User Manual page 38

Using the products
Display Brightness
Help
System Info
System
Factory Reset
Help
System Info
Factory Reset
System
Changing the IP address assignment
MAC 00:1B:66:7D:56:D3
Mode
Network
IP
Subnet
Changing the IP address
Mode
IP
Network
Subnet
Gateway
Changing the subnet mask
Mode
IP
Subnet
Network
Gateway
IPv6 1188:80F3:1388:
36
Use a QR scanner (e.g. your smartphone or a reading device for QR codes)
to scan the QR code that appears on the receiver display panel or follow the
given link in your browser.
Alternatively, you can click on the desired link in the above table.
Retrieving system information
You can display the serial number and the current firmware version of the
receiver.
Select System Settings – System Info.
75
The serial number as well as the version number and the date of the current
firmware are displayed.
Press the
Exit
Resetting the receiver to the factory default settings
The System Settings – Factory Reset menu item allows you to reset the
receiver to its factory default settings.
After the reset, the receiver is restarted and the standard display is shown on
Exit
the display panel.
Changing the network configuration
If you change a setting in the Mode, IP, Subnet and Gateway sub-
menus of the Network Settings menu, you will be prompted to restart
the receiver.
Switch the receiver off and on again so that changes to the network
configuration take effect.
You can choose between static and dynamic IP address assignment.
mode
Select Network Settings – Mode.
Exit
Setting
Fixed IP
0.0.0.0.
Fixed IP
0 0 0 0
Automatic When switched on, the receiver is automatically assigned a
You can change the IP address of the receiver. The new IP address becomes
effective only if Fixed IP has been selected in the Mode menu item.
Select Network Settings – IP.
Exit
Fixed IP
Enter the IP address.
0.0.0.0.
Select Save and confirm by pressing the jog dial.
0.0.0.0.
0 0 0 0
You can change the subnet mask of the receiver.
Select Network Settings – Subnet.
Fixed IP
0.0.0.0.
Enter the subnet mask.
0.0.0.0.
Select Save and confirm by pressing the jog dial.
0.0.0.0.
ESC button to return to the operating menu.
Meaning
The receiver is assigned a static IP address. You can enter the
static IP address via the IP menu item.
dynamic IP address.