Checking The Charge Status Of The Batteries Or Accupacks; Checking The Rf Signal Level - Sennheiser evolution D1 User Manual

Using the products
Battery status display
Accupack status display
Switching the handheld transmitter off
Long-press the
LONG = OFF
The display panel and the status LED go off.
Checking the charge status of the batteries or
accupacks
When the capacity of the batteries or the accupack is so low that the remain-
ing battery life is less than 30 minutes, the status LED on both the transmitter
and the receiver flashes red.
In addition, the empty battery icon flashes on the display panel of both the
receiver and the transmitter.
If you power the transmitter with batteries, a 6-segment battery icon is
shown on the display panel of both the receiver and the transmitter:
EQ DE-S AGC
NAME
If you power the transmitter with the optional accupack, the expected battery
life is shown on the display panel of both the transmitter and the receiver:
EQ DE-S AGC
NAME
10 h

Checking the RF signal level

The field strength of the RF signal received by the receiver is shown on the dis-
play panel of both the receiver and the transmitter.
EQ DE-S AGC
NAME
8 h
If no RF signal is being received, e.g. because the paired device is switched off
or out of range, all segments of the RF signal level display are grayed out. In
addition, the background of the display panel changes back and forth
between light and dark and No Link
ON/OFF button in the direction of the transmitter body.
NAME
NAME
10 h
NAME
appears on the display panel.
27