Sennheiser evolution D1 User Manual page 10

Product overviews
7
Status LED
lights up green:
flashes green:
flashes alternately
green and red:
lights up yellow:
flashes red:
lights up red:
8
R-SMA socket
9
Cable grip
0 DC IN
socket
A
¼" (6.3 mm) jack socket
AF OUT UNBAL
B
XLR-3 socket
C
Ethernet socket
D
R-SMA socket
8
A radio link to the transmitter is established. The batteries of the received
transmitter are sufficiently charged.
The PAIR button has been short-pressed. Paired devices are being identified.
The PAIR button has been long-pressed. The receiver establishes a radio link
to a transmitter whose
The received transmitter has been muted with the
Muted is displayed on the display panel.
The battery capacity of the received transmitter is only sufficient for approx.
30 minutes of operation.
No radio link to a transmitter. In addition, the background of the display panel
changes back and forth between light and dark and No Link
display panel.
Operating elements – rear panel
ANT II Antenna input II for connecting a supplied 2G4 rod antenna (for details, see
page 16)
for the cable of the power supply unit
for connection of the power supply unit
Unbalanced audio output for connection to the ¼" (6.3 mm) jack input of the
mixing console (for details, see page 20)
AF OUT BAL Balanced audio output for connection to the XLR-3 input of the mixing console
(for details, see page 20)
LAN for connecting to a network router or a switch (e.g. to control, monitor and
update several receivers via a mobile device or a computer (for details, see
page 20)
ANT I Antenna input I for connecting a supplied 2G4 rod antenna (for details, see
page 16)
PAIR button has also been long-pressed.
0
9
8
MUTE switch. In addition,
appears on the
C
B
A
D