Sennheiser evolution D1 User Manual page 36

Hide thumbs Also See for evolution D1:
Table of Contents

Advertisement

Using the products
Effects Reset
Audio Level
Output Type
Audio
Low Cut
Auto Gain Control
Effects Reset
Audio Level
Audio
Output Type
EQ DE-S AGC
NAME
10 h
Debug Mode
Auto Lock
System
Mute Switch
Display Brightness
34
Coarsely adjusting the output level of the receiver (Mic/Line)
You can coarsely adjust the output level of the receiver to match the input
(mic or line) of the connected mixing console.
Select Audio Settings – Output Type.
10 dB
Setting
Line
Exit
Line
Off
Mic
Fine-tuning the output level of the receiver
You can fine-tune the output level of the receiver to match the input (mic or
line) of the connected mixing console.
Select Audio Settings – Audio Level.
Off
Turn the jog dial to increase or reduce the audio level.
10 dB
Turning the jog dial by one notch increases or reduces the audio level by
Line
1 dB. You can adjust the audio level between 0 dB and 30 dB.
Exit
Activating/deactivating the lock mode
The receiver is delivered with the lock mode deactivated. This is indicated by
the open padlock icon on the standard display as shown on the left.
To activate the lock mode:
Select System Settings – Auto Lock – On.
Stored
on the standard display for 10 seconds. If, during these 10 seconds, no but-
ton is actuated on the receiver, the lock mode is activated and the locked
padlock icon
The lock mode prevents that the receiver is accidentally switched off or that
settings are inadvertently changed during operation. If one of the receiver
buttons is actuated while the lock mode is activated, Locked
unlock press & hold SET appears on the display panel of the receiver.
To temporarily deactivate the lock mode:
Long-press the jog dial.
Unlocked
The open padlock icon
mode is deactivated for 10 seconds. If, during these 10 seconds, no button
is actuated on the receiver, the lock mode is automatically activated again.
To permanently deactivate the lock mode:
If the lock mode is temporarily deactivated, select System Settings – Auto
Exit
Lock – Off.
Off
Stored
Active
appears on the standard display.
75
Meaning
The output level is adjusted to match a line input.
The output level is adjusted to match a mic input.
appears on the display panel. The open padlock icon
appears on the standard display.
appears on the display panel.
appears on the standard display and the lock
appears on the display panel. The lock mode icon no longer
appears
and To

Advertisement

Table of Contents
loading

Table of Contents