12. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding with
repair work. Failure to heed this caution may result in electric shocks.
12.1 Outdoor Electronic Controller Removal Procedure
12.1.1
CU-E9PFE
Caution! When handling electronic controller, be careful of electrostatic discharge.
1
Remove the 3 screws of the Top Panel.
2
Remove the 6 screws of the Front Panel.
3
Remove the screw of the Terminal Board
Cover.
4
Remove the Top Cover of the Control Board
by 4 hooks.
Fig. 1
Fig. 2
Fig. 3
WARNING
5
Remove the Control Board as follows:
44
Fig. 4
Fig. 5
Fig. 6