Playing Cds; Playing A Cd - Sony CDP-M333ES Operating Instructions Manual

Playing CDs

Playing CDs

Playing a CD

You can play all the tracks on a disc in the original
order (Continuous Play). You can also play up to 400
discs consecutively. Make sure you have inserted the
discs correctly as indicated on pages 7 and 8.
?/1
I / 1
1
Turn on the amplifier and select the CD playing
position.
2
Press ?/1 to turn on the player.
3
Press CONTINUE to select ALL DISCS or 1 DISC
Continuous Play mode.
Each time you press CONTINUE, "ALL DISCS" or
"1 DISC" appears alternately in the display.
When you select
ALL DISCS
1 DISC
4
Turn the JOG dial until the desired disc number or
Disc Name (see page 20) appears in the display to
select the first disc (ALL DISCS) or the disc you
want (1 DISC).
2nd NEXT
* D I S C - 2 *
ALL 1 DISC
PROGRAM 1 2 3 X-FADE DELETE
MULTI CD
5
Push the JOG dial to start playing and adjust the
volume on the amplifier.
The selected disc is set to the playing position, and
the player plays all the discs from the selected one
(ALL DISCS) or all the tracks once (1 DISC).
10
Downloaded From Disc-Player.com Sony Manuals
CONTINUE
H
The player plays
All discs in the player consecutively
in the order of disc number. Empty
disc slots are skipped.
Only the one disc you have selected.
DISC ART. HIT TRACK GROUP ART. MIN STEP
0 * * * *
S SHUFFLE REPEAT 1 GROUP
TEXT NO DELAY CD1 CD2 CD3
Operations you way want to do during play
To
Stop playback
Pause
Resume playing after
pause
JOG
Go to the next disc Z
Go back to the
preceding disc Z
Go to a specific track
directly Z
Go to a point in a
track while monitoring
the sound Z
Go to a point in a track
by observing
the display Z
Go to the next track
Go back to the
preceding track
Stop playing and
remove the disc
z
When you turn off the player
The player remembers the last playing disc and the play
mode: Continuous (on page 10), Shuffle (on page 15), or
SEC
Program (on page 16). When you turn on the player
again, the player plays the same disc in the same play
mode.
Note
If " " appears in the large display, the disc has reached the
end while you were pressing M. Turn the . AMS >
dial counterclockwise or press m to go back.
Do this
Press x.
Press X.
Press X or H.
Press DISC SKIP + once.
Hold down the button to skip other
discs.
Press DISC SKIP – once.
Hold down the button to skip other
discs.
Press the number button of the track
on the remote. When you directly
locate a track numbered over 10,
press >10 first, then the
corresponding number buttons.
Press m (backward)/M
(forward) on the remote and hold
down until you find the point.
Press m (backward)/M
(forward) on the remote and hold
down until you find the point
during pause. You will not hear the
sound during the operation.
Turn the . AMS > dial
clockwise by one click.
Turn the . AMS > dial
counterclockwise by one click.
Press OPEN/CLOSE.