Sony CDP-M333ES Operating Instructions Manual page 25

Labeling groups (Group Name)
You can label the preset group number anything you
like, such as a category, using up to 13 characters.
Note that you cannot store the Group Name if you
have not assigned any disc to the group.
1
Press MENU/NO.
"NAME IN ?" flashes.
2
Turn the JOG dial until the group number you
want to label appears in the display, and then push
the JOG dial.
The flashing cursor ( ) appears.
3
Turn the JOG dial until the desired character
appears in the display.
The cursor disappears and the first space for the
Group Name flashes.
As you turn the JOG dial clockwise, the characters
appear in the following order. Turn the JOG dial
counterclockwise to go in reverse order.
(space) A B C D E F G H I J K L M N O P Q R S T U
V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w
x y z 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , – . / : ; <
= > ? @ _
4
Push the JOG dial to select the character.
The selected character lights up, and the flashing
cursor appears at the next space to be input.
To make a correction
Press CLEAR and begin again by inputting the correct
characters.
5
Repeat steps 3 and 4 to input more characters.
See also "Labeling discs on the player" on page 20
for details.
6
Press YES to store the Group Name.
Downloaded From Disc-Player.com Sony Manuals
Storing Information About CDs (Custom Files)
Storing Information About CDs (Custom Files)
Changing the Group Name
1
Follow steps 1 and 2 in "Labeling groups (Group
Name)" on page 25 to select the Group Name you
want to change.
2
Turn the . AMS > dial to move the cursor to
the position you want to change.
When the cursor position is on the character, the
character flashes, and when the cursor position is
on a blank space, the cursor ( ) appears in the
display.
To change characters
Turn the JOG dial until the desired character appears in
the display.
To add characters
Push the JOG dial. The new blank space appears next to
the selected character, then turn the JOG dial until the
desired character appears in the display.
To erase characters
Press CLEAR. The selected character disappears.
3
Repeat step 2 to change more characters.
4
Press YES to store the Group Name.
Erasing a Group Name
1
Follow steps 1 and 2 in "Labeling groups (Group
Name)" on page 25 to select the Group Name you
want to erase.
2
Press and hold CLEAR until all the characters are
erased.
3
Press YES.
The Group Name is erased.
25