Page 1
WIFI Pan/tilt Network Camera User Manual Read and understand thoroughly this safety awareness & instruction before using and keep it for future reference SMART SECURITY SYSTEM...
Page 2
Quick Guide Get a general idea on this network camera Product Overview LED Indicator: From Left to Right 1.Network indicator 2. Alarm indicator 3. Record indicator 4 alarm-arming indicator Pls Check the indicator light whether working properly Indicator Lit stay-on Lit flashing Lit off Network...
Page 3
Interface ① Network interface:Using wired network access to the Internet :For receiving WIFI signal; ② WIFI ant :Insert SD card to record picture /video; ③ SD interface SMART SECURITY SYSTEM...
Page 4
④ Power supply interface;connect with power adaptor; ○ Pls connect the inputs (① ) in sequential order according to above drawing ⑤ Bracket: Installation Bracket ⑥ Alarm ant Interface: For Receiving Alarm Signal download IOS clients can search and download 2cu from Apple APP store, Android clients can search and download it from Google Play.
Page 5
2) point the Infrared control at the IR receiver on the network camera. 3) Open APP 2cu>toolbox> Infrared control,then you can see the up/down/left/right button. Press any one button ,if the network camera can move around , means the Infrared control works well .
Page 6
network , then press the device to be added , input the device name and password . if the device is a new one had never set any password, so the password you input will be the visiting password for this device . (2)add device manually Press the in the bottom right corner to be in the contact...
Page 7
Device monitoring (1)press Device Icon in contact interface:in the contact interface ,just press the device Icon to start monitoring function; (2)Press Number dial plate:Just input the device ID,and then Press the monitoring icon,input the visiting password To start monitoring Device Setting SMART SECURITY SYSTEM...
Page 8
( optional function) (1)Defense area settings & Alarm settings This device can support 8*8=64 wirelss detectors and 8 remote controlling alarm system via learning code . The specific operation of learning code as follows: Click Contact name ->settings->Defense Area Settings,Press the name of one Defense Area to view 8 small defense area.
Delete the code : click the defense area number which has learned code and confirm to delete it . Alarm settings: There are two way to Arm the alarm. 1: press the he Infrared controller which already learned code . ARM button on t 2: in APP 2cu , beside the Device name on the contact interface ,there is...
Page 10
Binding Account :Input the APP ID to the binding account. ( maximum 3 APP ID can be set). Alarm Email : iput the email address to receive the ALARM message from the device . Motion Detection:Alarm will be triggered if device detects moving objects in the video image Buzzer:The device will start buzzer if any alarm appears (2)Device update...