If Connection Jumps; Frequency Bands - Huawei E5172 Quick Start Manual

Connect device cables.
1.
Configure the computer's IP address so that the IP addresses of the computer
2.
and the device are in the same network segment.
Note:
The device's default IP address is 192.168.1.1, the subnet mask is
255.255.255.0.
It is recommended that you use the automatically obtained IP addresses for the
computer and domain name system (DNS) server. If you manually configure
the computer IP address, you must set the DNS server IP address to the
device IP address. Otherwise, you will fail to log in to the web management
page.
Open the browser, and enter http://192.168.1.1 in the address box.
3.
Enter the user name and password to log in to the web management page.
4.
Note:
The default user name is admin.
The default password is admin.
If your connection jumps between the 4G, 3G and 2G networks
In the 4G router setup manager you can lock the router to a particular network (only
possible when disconnected):
Select Internet from the menu in the upper part, then go to Network Connection in
the left menu. Select Network Mode and one of the preferred modes: Auto, 4G, 3G
or 2G.
The WiFi Router supports the following frequency bands
FDD LTE 800/900/1800/2100/2600 MHz, TDD LTE 2600 MHz
DC-HSPA+/HSPA+/HSPA/UMTS 900/2100 MHz
EDGE/GPRS/GSM 850/900/1800/1900 MHz
8