Rs232/Usb Io; Uploading Protocol Files - AMX IS-SPX-1000 Operation/Reference Manual

RS232/USB IO

FIG. 21
Administration - RS232/USB IO page
Use the RS232/USB IO page to change the parameters of the IS-SPX-1000's RS232 port. This may be used to
control both when information is transmitted to the display and when the display itself is turned on and off.
Administration - RS232/USB IO page
Settings:
Protocols:
Control monitor
power:
Turn monitor ON:
Turn monitor OFF:
Modify COM port
settings:
Baud rate:
Data bits:
Parity:
Stop bits:
Upload Protocol File:

Uploading Protocol Files

To add to the existing serial port protocols, new protocol files for displays may be uploaded to the IS-SPX-
1000. To do so, either enter the URL for the file in the Upload Protocol File: field or click the Browse button
to locate it.
32
Use this dropdown menu to select the particular serial port protocol to be used.
Click Apply to save all changes.
NOTE: The default is "Disabled". If this is chosen, all fields below are greyed out.
Click this box to enable or disable the Turn monitor ON and Turn monitor OFF fields.
Select the time (in 24-hour military time) for the monitor to turn on.
Select the time (in 24-hour military time) for the monitor to turn off.
Click this box to enable or disable the Baud rate, Data bits, Parity, and Stop bits
fields.
Use this dropdown menu to select the preferred baud rate. The default rate is 9600.
Use this dropdown menu to select the preferred data bit rate: 7 or 8.
Use this dropdown menu to select the preferred parity: none, even, or odd.
Use this dropdown menu to select the preferred stop bit rate: 0 or 1.
To upload a new protocol to the IS-SPX-1000 to augment the ones already used by
the IS-SPX-1000, use this field to browse a computer or network for the appropriate
file.
IS-SPX-1000 Inspired Signage Xpress Player