Installing The Is-Spx-Mnt Mount Adapter; Installing The Nxa-Avb Breakout Box Mounting Bracket - AMX IS-SPX-1000 Operation/Reference Manual

Installing the IS-SPX-MNT Mount Adapter

The optional IS-SPX-MNT Mount Adapter Kit (FG1231-17) is intended to allow attachment of the IS-SPX-
1000 to Vesa display wall mounts, thereby keeping it within easy reach for firmware uploads and other basic
maintenance.
FIG. 2 Installation of the IS-SPX-MNT Mount Adapter (62-1231-03)
To install the IS-SPX-MNT Mount Adapter:
1.
Select the side of the IS-SPX-1000 to which the adapter is to be installed. The IS-SPX-MNT may be
installed to either side of the device.
2.
Using the supplied pan-head screws, attach the IS-SPX-MNT to the side of the device.
3.
Use the appropriate mounting holes to attach the assembly to the display wall mount.

Installing the NXA-AVB Breakout Box Mounting Bracket

The optional NXA-AVB Breakout Box Mounting Bracket Kit (FG1231-17) is intended to allow attachment of
the IS-SPX-1000 to solid surfaces such as desk tops, thereby keeping it within easy reach for firmware uploads
and other basic maintenance.
FIG. 3 Installation of the NXA-AVB Breakout Box Mounting Bracket (62-1231-03)
To install the NXA-AVB Breakout Box Mounting Bracket:
1.
Select the side of the IS-SPX-1000 to which the adapter is to be installed. The mounting bracket may be
installed to either side of the device.
2.
Using the supplied pan-head screws, attach the mounting bracket to the side of the device.
3.
Use the mounting holes to attach the assembly to a fixed surface.
IS-SPX-1000 Inspired Signage Xpress Player
Mounting holes
Mounting holes
IS-SPX-1000
IS-SPX-MNT Mount Adapter
Pan head screws
IS-SPX-1000
Mounting Bracket
Pan Head Screws
9