Media Sources - Advanced; Configuring Network Credentials For Remote Servers - AMX IS-SPX-1000 Operation/Reference Manual

Media Sources - Advanced

FIG. 18 Administration - Media Sources - Advanced page
In some cases, a project may require storage access to multiple sources. Use the Advanced tab on the Media
Sources page to select those sources and save usernames and passwords for easy access.
Administration - Media Sources - Advanced page
Network 
credentials:

Configuring Network Credentials For Remote Servers

To configure network credentials to allow the IS-SPX-1000 to access a remote server:
1.
On the Media Sources page in the Advanced tab, enter the server's URI path in the Server URI field.
2.
Enter the server's Username, Password, and Realm into the corresponding fields.
3.
If you need to add multiple servers, or if you need to specify multiple Username and Password for the
same server but for different realms, press the Add Server Row button to open a new row of fields.
4.
When finished, press the Apply button to save your changes.
If your network storage path has any spaces in the path, these must be replaced with
the characters "%20" or the IS-SPX-1000 cannot find the media source.
IS-SPX-1000 Inspired Signage Xpress Player
In each row, enter the Server URI, the username, the password, and the particular
realm to be accessed. To add additional sources, click the Add Server Row button to
start a new row. Click Apply to save all changes.
27