AMX IS-SPX-1000 Installation Manual

Overview
The IS-SPX-1000 InspiredSignage XPress Player (FG1231-01) offers a simple
way to deliver digital signage solutions. The rich set of functionalities offered by
the SPX-1000 simplifies the implementation, management and maintenance of
a range of audio/visual communication solutions. The SPX-1000 is designed to
satisfy the reliability needs of nonstop 24/7 service and minimize maintenance
costs. The SPX-1000 contains no moving parts and is engineered to be used
wherever digital signage displays are utilized. Whether integrated behind
displays, beneath a technical floor, or in a custom enclosure, the IS-SPX-1000 is
ready to deliver with a small form factor and a low power draw. The USB
interface can be used to extend the internal storage through memory sticks or
externally powered hard drives. The same interface can support external
devices such as touch screen controllers or keyboards.
RS232 Interface
5V-DC Input
Digital Video Out (HDMI)
FIG. 1
IS-SPX-1000 InspiredSignage XPress Player

Specifications

IS-SPX-1000 Specifications
Dimensions (HWD) 1.0" x 6.27" x 3.24" (25.4mm x 159.26mm x 82.30mm).
Weight 0.60 lbs (272.16 g).
Enclosure: Metal with black matte finish.
Power Supply: • 5V DC, typ. 0.4A
• 2 watts
Power Supply Input: • 100-240V 50-60 Hz, max input current 0.6A.
Real time clock: • Min. accuracy 1 minute/month free running, battery backed.
Storage: • Internal storage: 2GB solid state.
• External storage: Flash drives and hard disks via USB 2.0
port.
Front Panel Components:
• Ethernet RJ45 Ethernet 10/100 Mbit/s (RJ-45), IEEE 802.3u, 802.3x.
• USB 2.0 Used with Flash drives and hard disks for additional external
Connector storage; interactivity events via touch screen, keyboard and
mouse.
• Status LED LED displays status of device:
• Green LED flashing once per second (regular operation)
• Green LED flashing 4 times per second (recovery mode)
• Green LED on and flashing occasionally (booting up)
• Orange LED blinks steadily (Zeroconf link-local IP address
is assigned to device)
• LED alternates between red and orange (failure)
• Reset Reset button for rebooting device.
Rear Panel Components:
• DC Power Input 5V DC, typ. 0.4A (2W).
• HDMI HDMI (incl. digital audio), DVI via adapter.
• Analog Audio Out Supported audio codecs: MPEG audio layer 1/2/3 (MP3), ITU
G.711, G.722, G.729,PCM, Microsoft WMA, Real Audio.
IS-SPX-1000
Ethernet USB 2.0
Reset
RJ45
Connector
Status LED
Analog Analog Video
Audio Out (VGA)
Out
InspiredSignage XPress Player
IS-SPX-1000 Specifications (Cont.)
Rear Panel Components (Cont.):
• Analog Video Out
• RS232 Interface
Digital Display Compatibility
• Aspect ratio
• Maximum
resolution
• Video output
• Video connectors
front
Certifications:
Operating
Temperature:
Storage
Temperature:
Included
Accessories
Other AMX
Equipment
Remote Monitoring
The IS-SPX-1000 implements an intuitive on-board web interface. By
rear
connecting to the IP address of a unit with any web browser, the user can
monitor the status of the unit and even configure specific parameters. To support
the management of a large distributed network of IS-SPX-1000 devices, native
support for the SNMP protocol is provided. Through this standard protocol, the
devices can publish all their vital parameters, including storage level and CPU
status. Via this protocol, the IS-SPX-1000 can interface with any SNMP network
management. These tools can provide graphical frameworks for remote
monitoring the status of an individual IS-SPX-1000 unit or a complex network of
units.
Storage
The IS-SPX-1000 comes with 2 gigabytes of internal memory, but this may be
expanded by connecting to external hard drives, thumb drives, or other storage
options via the USB port on the front of the device. The USB port also allows
connection to external control devices such as touch panels.
Configuration
The IS-SPX-1000 is configured via an intuitive web interface that can be
accessed by using AMX ZeroConfiguration technology or by entering the
device's IP Address into a ZeroConfiguration-enabled browser. This interface
allows the configuration of display modes, network settings, time zone settings,
firmware updates and other operational parameters. For more details, please
refer to the IS-SPX-1000 Operation/Reference Guide, available at
www.amx.com.
Connectivity
The IS-SPX-1000 connects to displays through onboard HDMI and VGA
connectors. Through the HDMI output, it is possible to support DVI displays via
an adapter cable, but in this case the digital audio is lost. Both connectors are
simultaneously active so that two displays can be supported without the need of
additional splitters or distribution amplifiers. Where analog audio is needed, an
analog audio connector is provided.
The IS-SPX-1000 is a high-definition ready device: it can render content on
digital displays with resolution up to 1280x720 at 60Hz (720p resolution). The
maximum resolution supported by the IS-SPX-1000 is:
• 1280x720 (16:9)
• 1024x640 (16:10)
• 1024x768 (4:3)
The IS-SPX-1000 connects to the network through a standard RJ-45 connector.
Each device has a unique MAC address that allows the network to identify the
unit and thus the associated display.
Installation Guide
VGA (DB15 HD connector).
RS232, up to 115200 bauds, mini-jack 3.5mm.
• 16:9, 16:10, 4:3 (horizontal & vertical)
• 1280x720 (16:9), 1024x640 (16:10), 1024x768 (4:3)
• 720p (HD-Ready), 576p, 480p, VGA; 50 or 60 fps
• HDMI (incl. digital audio), DVI via adapter. VGA (DB15 HD
connector). Simultaneous use of HDMI and VGA possible.
• FCC
• CE
• RoHS
HDMI: 32ºF to 104ºF (0ºC to 40ºC); 10% to 90% RH
VGA: 50ºF to 104ºF (10ºC to 40ºC); 10% to 90% RH
-13ºF to 113ºF (-25ºC to 45ºC); 10% to 90% RH
• Power Source (3A-161WP05)
• IS-SPX-1000 Installation Guide (93-1231-01)
• NXA-AVB Breakout Box Mounting Kit (KA-2250-40)
• IS-SPX-MNT Mount adapter (FG1231-71)