Cancelling A Programme; Opening The Door - Electrolux EWS 1056 EGU User Manual

14 www.electrolux.com
9.4 Starting a programme
without delay start
Press
• The indicator
stays on.
• The indicator
display.
• The programme starts, the door is
locked and the display shows the indi-
cator
• The drain pump can operate for a short
time when the appliance fills water.
After approximately 15 minutes
from the start of the programme:
• The appliance adjusts automati-
• The display shows the new val-
9.5 Starting a programme with
delay start
• Press
play shows the delay you want to set.
The related indicator comes on the dis-
play.
• Press
– The appliance starts the countdown.
– When the countdown is completed,
the programme starts automatically.
You can cancel or change the set
of the delay start before you press
To cancel the delay start:
1. Press
pause.
2.
Press
Press
gramme immediately.
9.6 Interrupting a programme
and changing the options
You can change only some options be-
fore they operate.
1. Press
2.
Change the options.
:
stops to flash and
starts to flash on the
.
cally the programme duration
agree with the laundry load.
ue.
again and again until the dis-
:
.
to set the appliance to
until the display shows
again to start the pro-
. The indicator flashes.
3. Press again. The programme con-
tinues.

9.7 Cancelling a programme

1.
Press the button
onds to cancel the programme and to
deactivate the appliance.
2. Press the same button again to acti-
vate the appliance. Now, you can set
a new washing programme.
The appliance does not drain the
water.

9.8 Opening the door

While a programme or the delay start op-
erates, the appliance door is locked and
the display shows the indicator
CAUTION!
If the temperature and level of the
water in the drum are too high,
you cannot open the door.
Open the appliance door when the
delay start operates:
1.
Press to pause the appliance.
2.
Wait until the door lock indicator
goes off.
3. Open the door.
4. Close the door and press
The delay start continues to operate.
Open the appliance door when the
programme operates:
1.
Press the button
onds to deactivate the appliance.
2.
Wait for some minutes and then open
carefully the appliance door.
3. Close the appliance door.
4. Set the programme again.
'.
9.9 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is acti-
vated).
• In the display a
• The indicator
• The door lock indicator
for some sec-
.
again.
for some sec-
comes on.
goes off.
goes off.