Related Manuals for Electrolux EWS 105416 A
Summary of Contents for Electrolux EWS 105416 A
- Page 1 ..................... EWS 105416 A EN WASHING MACHINE USER MANUAL EWS 125416 A...
-
Page 2: Table Of Contents
2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information Hints and tips Environment concerns Before first use Technical information Daily use Product description Care and cleaning Control panel Troubleshooting Programmes Installation Subject to change without notice. -
Page 3: Environment Concerns
3 • Do not install and connect a damaged Electrical connection appliance. • Make sure that the appliance is earthed. • Make sure to remove all packaging and • Make sure that the electrical information transport bolts. on the rating plate agrees with the power •... -
Page 4: Technical Information
1200 rpm (EWS 125410 A) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. Brand logo Electrolux Name of the distributor Electrolux Lehel Kft 1142 Budapest Erzsébet kir.né útja 87 Model denomination 105416 A 125416 A... -
Page 5: Product Description
5 PRODUCT DESCRIPTION Worktop Feet for the appliance level Detergent dispenser Water drain hose Control panel Mains cable Door handle Water inlet valve Drain pump Transit bolts Rating plate Feet for the appliance level ACCESSORIES Large plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. -
Page 6: Control Panel
6 electrolux CONTROL PANEL Programme knob Rinse hold button Display Prewash button Start button Spin button Easy iron button Delay Start button Extra rinse button PROGRAMME KNOB D • The programme time • Alarm codes Turn this knob to set a programme. -
Page 7: Programmes
7 Use this function for persons allergic to de- The display shows only the spin tergents and in areas where the water is speeds available with the set pro- soft. gramme. • Deactivate the spin phase. RINSE HOLD BUTTON The spin phase is off. - Page 8 8 electrolux Programme Type of load and soil Programme Possible Temperature Weight of load phases functions White and coloured cotton with Wash Bavlna light soil. Rinses 30 °C max. 5 kg Spin phase at the maximum speed Synthetic or mixed fabric items Wash Műszál...
-
Page 9: Hints And Tips
9 Programme Type of load and soil Programme Possible Temperature Weight of load phases functions All fabrics. Rinse with additive Öblítés max. 5 kg Spin phase at the maximum speed Spin phase for hand washed laun- Drainage of the water Centrifugálás... -
Page 10: Before First Use
10 electrolux curs, adjust manually the items in the tub • If you use liquid detergents, do not set and start the spin phase again. the prewash phase. • If your appliance has not the detergent STUBBORN STAINS dispenser with the flap device, add the liquid detergents with a dosing ball. - Page 11 11 2. Put the laundry in the drum, one item at Always obey the instructions that you find a time. Shake the items before you put on the packaging of the detergent prod- them in the appliance. Make sure not to ucts.
- Page 12 12 electrolux SETTING AND STARTING A To open the appliance door: PROGRAMME 1. Turn the programme knob to to de- activate the appliance. 1. Turn the programme knob and set the 2. Wait for some minutes before to open washing programme.
-
Page 13: Care And Cleaning
13 • The brightness of the display goes off. Press one of the buttons to deactivate the • The display shows the symbol End. energy saving status. • All indicators go off. CARE AND CLEANING Warning! DOOR SEAL Regularly examine the seal and remove all Disconnect the appliance from the mains objects from the inner part. - Page 14 14 electrolux 3. Clean all the parts with water. 3. Unscrew the filter to let the water flow 4. Clean the dispenser recess with a out. brush. 4. When the container is full of water, 5. Put back the dispenser in the recess.
- Page 15 15 9. Make sure that you tighten correctly the 4. Install again the inlet hose. Make sure filter to prevent leakages. that the couplings are tight to prevent leakages. 10. Close the drain pump door. CLEAN THE INLET VALVE FILTER It could be necessary to clean the filter 5.
-
Page 16: Troubleshooting
16 electrolux Warning! Make sure that the The manufacturer is not responsible for temperature is more than 0 °C before damages caused by low temperatures. you use the appliance again. TROUBLESHOOTING The start of the appliance does not occur or •... - Page 17 17 Problem Possible cause Possible solution The spin phase does The spin phase is off. Set the spin programme. not operate. The filter of the drain pump is Clean the filter of the drain pump. Refer blocked. to 'Care and cleaning'.
-
Page 18: Installation
18 electrolux INSTALLATION UNPACKING 4. Open the door and remove all the items from the drum. 1. Use the gloves. With a scissor cut the straps and with a cutter remove the ex- ternal film. Do not to discard the plastic cover (A). - Page 19 19 7. Install the plastic cover (A), removed Warning! Remove all the packaging from the top of the packaging, to the and the transit bolts before you install bottom of the appliance. Remove the the appliance. adhesive strip and close the bottom of We recommend that you keep the the appliance.
- Page 20 20 electrolux THE INLET HOSE • Connect the hose to the appliance. Loose the ring nut to set it in the correct position. • To a stand pipe with vent-hole. Refer to the illustration. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm.
- Page 21 21...
- Page 22 22 electrolux...
- Page 23 23...
- Page 24 155219450-A-102012...
Need help?
Do you have a question about the EWS 105416 A and is the answer not in the manual?
Questions and answers