Four-Wheel Drive Section - Kubota M105S Workshop Manual

M105S, WSM

[5] FOUR-WHEEL DRIVE SECTION

(1) Spiral Bevel Pinion Shaft
(2) 32T Gear
2-wheel drive or 4-wheel drive is selected by changing position of the shifter (6) on drive shaft (4) using the front
wheel drive lever.
When the front wheel drive lever is set to "Disengage", the shifter is in neutral and power is not transmitted to the
front wheel drive shaft (8) when the front wheel drive lever is set to "Engage", the shifter slides to the left to engage
with the front wheel drive shaft (8).
Power is transmitted as follows:
Spiral bevel pinion shaft (1) → 32T gear (2) → 30T gear (3) → Drive shaft (4) → coupling (5) → shifter (6) →
coupling (7) → front wheel drive shaft (8).
(3) 30T Gear
(4) Drive Shaft
(5) Coupling
(6) Shifter
3-M12
TRANSMISSION
(7) Coupling
(8) Front Wheel Drive Shaft
KiSC issued 03, 2007 A