Foscam FN3004H User Manual page 45

NVR User Manual
NOTE
Please do not modify the NVR system time when recording.
Parameter
Device Name
Time Zone
Automatically
synchronize
with and
Internet time
server
Date Format
Time Format
Disk Saturation
Language
Setup Wizard
Synchronize
time to camera
Pre-recorded
time
Click Save button to take effect.
Video
Choose "Menu > Settings > Video" in the Menu interface. The Video interface is displayed.
You can configure the encoding scheme parameters of the IP Camera, the NVR system will
synchronize your IP camera with encoding scheme.
Description
You can modify your device name to help you identify it.
Please select the time zone according to the actual situation.
Whether synchronize your NVR with an Internet time server.
Check: You need to configure the NTP Server.
Uncheck: You need to configure the Date and Time.
You need to configure the date format.
You need to configure the time format.
When the HDD is full. You can select the Cover the Earliest
Recording or Stop Recording.
Configure the language of the NVR interface.
Whether to enable startup wizard when the NVR system starts
again.
Time set by the NVR system. Whether to synchronize the time to the
connected IPC device.
Pre-recording time. When recording is performed, the system starts
recording n seconds before recording is enabled.
www.foscam.com