Network Access - Foscam FN3004H User Manual

NVR User Manual
matches with the requirements. And then connect the power adapter to power input
interface of NVR, the power indicator on the front panel will light on, indicating the power
is connected right.
Note
Please use the power adapter included in the package to avoid any damage to the
equipment.

Network Access

During the network connection, you should provide sufficient bandwidth to ensure the
fluency and clarity of the images transmitted over the network.
Connect to the Alarm Input and Output Devices
The alarm input/output device should be connect the Alarm IN /Alarm OUT interface of
NVR.
Connect to the Video Output Device
Connect the VGA Monitor to VGA interface of NVR, or Connect the HDMI Monitor to HDMI
interface of NVR.
Connect to the Mouse
Plug USB mouse into one of the USB interfaces of the NVR.
Connect to the Storage device
Plug USB Storage device into one of the USB interfaces of the NVR.
www.foscam.com