Operation
Energy management
To save energy, the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a pro‐
gramme.
Press the button to switch the
dishwasher back on.
The dishwasher will not switch off auto‐
matically if the time of day display has
been activated (see "Settings menu -
Time of day").
The dishwasher will not switch off
whilst a programme or the FlexiTimer
is running or if there is a fault.
52
At the end of the programme
The programme has finished when
appears in the display and the
Finished
door has opened slightly (if applicable).
If the
Consumption
tion is switched on, you can now call up
the actual energy and water consump‐
tion of the programme which has just
finished (see "Caring for the environ‐
ment - EcoFeedback consumption indi‐
cator").
The drying fan may continue to run for
a few minutes at the end of the pro‐
gramme.
Open the door fully so that the door
catch rail retracts again.
You can now empty the dishwasher.
If you have deactivated the auto‐
matic door opening function (see
"Settings menu - AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the dishwash‐
er could damage the edge of the
worktop because the fan is no longer
running.
programmable func‐