Switching On; Selecting A Programme - Miele G 6300 Operating Instructions Manual

Operation

Switching on

 Make sure the spray arms are not ob‐
structed.
 Close the door.
 Turn on the tap if it is turned off.
 Press the  button for at least 2 sec‐
onds.
The programme selected will appear
briefly in the display and the appropri‐
ate indicator light will come on.
Then, if applicable, the estimated ener‐
gy and water consumption for the pro‐
gramme selected will appear for a few
seconds.
Finally, the display will show the esti‐
mated programme duration for the pro‐
gramme selected.
50

Selecting a programme

Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
chart later on in this booklet.
 Use the programme selector button
 to select the programme required.
The indicator light next to the selected
programme will come on.
Further programmes are selected via
the Further  option.
 Use the programme selector button
 to select the Further  option.
The first of the further programmes will
appear in the display.
 Use the  arrow buttons to select
the programme required.
During the course of the programme
you can use OK to display the name
of the programme which is currently
running.
You can now select programme options
(see "Programme options").
If any programme options are selected,
the appropriate indicator lights will also
light up.