Live Call Screening Button Assignment Via Station Programming; Live Call Screening Cancel Button Assignment Via Station Programming - Panasonic KX-TVP50 Installation Manual

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
4.4.6 Live Call Screening Button Assignment via Station
Programming
For the Live Call Screening feature to work at an extension, the extension must have an LCS
button lit at the time of the message reception. This key must either be a DSS/BLF or CO key
with a lamp. Follow the procedure below to assign an LCS button on an extension. (This is a
station level programme and should be done at each individual telephone.)
1.
Enter PITS Programming:
For KX-TA series PBX
With the phone on-hook, Set the MEMORY switch to "PROGRAM".
(Display changes to PITS-PGM Mode.)
For KX-TD series PBX
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PITS-PGM Mode.)
2.
Press the desired FLEXIBLE (CO or DSS/BLF) button you want to assign as the LCS
button.
3.
Dial [92].
Screen output: LCS
4.
Press STORE.
5.
For KX-TA series PBX
Set the MEMORY switch to "SET".
For KX-TD series PBX
Press the PROGRAM button or lift the handset.
6.
Repeat these steps for each telephone.
4.4.7 Live Call Screening Cancel Button Assignment via Station
Programming
This button assignment allows you to assign a Flexible (CO, DSS) button as a Live Call
Screening Cancel button.
1.
Enter PITS Programming:
For KX-TA series PBX
With the phone on-hook, Set the MEMORY switch to "PROGRAM".
(Display changes to PITS-PGM Mode.)
For KX-TD series PBX
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PITS-PGM Mode.)
2.
Press the Flexible (CO, DSS) button that you wish to assign as a Live Call Screening
Cancel button.
3.
Dial [93].
Screen output: LCS Cancel
78 Installation Manual