Pride Victory Viper-3 Owner's Manual page 25

V . B A T T E R I E S A N D C H A R G I N G
What type and size of battery should I use?
We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are
deep-cycle batteries that are similar in performance in your scooter. Do not use wet-cell batteries, which
have removable caps.
WARNING! Corrosive chemicals are contained in batteries. Use only AGM or Gel-Cell
batteries to reduce the risk of leakage or explosive conditions.
NOTE: Sealed batteries are not serviceable. Do not remove the caps.
Use these specifications to reorder deep-cycle batteries from your authorised Pride Dealer:
Type:
Size:
Voltage:
Amperage:
BATTERY REPLACEMENT
WARNING! Battery posts, terminals, and related accessories contain lead and lead
compounds. Wash hands after handling.
To change a battery in your scooter:
1. Remove the seat by lifting it up and off your scooter.
2. Remove the rear shroud by gently lifting it up and off the scooter.
3. Disconnect the battery tie-down strap.
4. Disconnect the battery cables from the electronic controller module.
5. Disconnect the battery cables from the battery terminals.
6. Remove the old battery.
7. Place a new battery in the battery well.
8. Connect the red battery cable to the positive (+) battery terminal.
9. Connect the black battery cable to the negative (-) battery terminal.
10. Reconnect the battery cables to the electronic controller module.
11. Reconnect the battery tie-down strap.
12. Reinstall the rear shroud and the seat.
Why do my new batteries seem weak?
Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cad-
mium batteries (nicads), or in other common battery types. Deep-cycle batteries are specifically designed
to provide power, drain down their charge, and then accept a relatively quick recharge.
Victory Viper-3/Rev A/May 2003
Deep-cycle (AGM or Gel-Cell)
NF-22
12 volts each
55 AH
www.pridemobility.com
25