Your Scooter - Pride Victory Viper-3 Owner's Manual

Your scooter is an indoor/outdoor, motorised electric
scooter designed to enhance your personal mobility. For
easy transportation or storage, you can disassemble your
scooter into six components. See figure 5.
CONTROL CONSOLE ASSEMBLY
The control console assembly located on the front section houses all of the controls you need to operate
your scooter. See figure 6.
CAUTION! Do not expose the control console assembly to moisture. In the event it does
become exposed to moisture, do not attempt to operate your scooter until it has dried
thoroughly.
BATTERY CONDITION METER
HORN BUTTON
THROTTLE
CONTROL LEVER
(REVERSE)
Figure 6. Control Console Assembly
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approxi-
mate battery voltage strength. For further information on battery charging, see V. “Batteries and Charging.”
Speed Adjustment Dial
This dial allows you to preselect and limit your maximum speed.
n Set the dial to one of five settings from the slowest (image of the tortoise) to the fastest (image of the
hare) speed setting.
On/Off Indicator LED
When lit, this LED indicates that your scooter is turned “on”.
Victory Viper-3/Rev A/May 2003
I V . Y O U R S C O O T E R
LIGHT SWITCH
www.pridemobility.com
HAZARD LIGHT SWITCH
SPEED ADJUSTMENT DIAL
ON/OFF INDICATOR LED
KEY SWITCH
HORN BUTTON
THROTTLE CONTROL
LEVER (FORWARD)
17