Related Manuals for Vax Dynamo Cordless 21.6V
Summary of Contents for Vax Dynamo Cordless 21.6V
- Page 1 GRAB & GO CORDLESS GRAB & GO CORDLESS CONVENIENCE FOR CONVENIENCE FOR QUICK CLEAN-UPS! QUICK CLEAN-UPS! LET’S GET STARTED. LET’S GET STARTED. VX41...
-
Page 2: Let's Talk Safety
Vax authorised repair agent prior to continuing use. Please contact our Customer Care • This appliance is not intended for use by persons... - Page 3 Do’s Always make sure the filter and dirt container are fitted Always protect the charger cord from heated surfaces correctly before using your vacuum cleaner. or near open flames. Turn off all controls on the vacuum cleaner before Use only SAA approved 10amp extension cords. disconnecting or connecting to charger.
- Page 4 Maintaining your carpets and hard fl oors will ensure they keep their appearance for longer and Vax will help you take good care of them. Taking care of your Dynamo Power Also inside this guide are instructions on maintaining your new machine, so that it’s always ready...
-
Page 5: Table Of Contents
Contents Let’s talk safety Dynamo Power Included with Getting to know your machine your machine Getting started Docking station Using your machine 2-in-1 tool Taking care of your machine 2-in-1 tool connector Let’s talk technical Charger Accessories What to do if it goes wrong Screw (for attaching handle to vacuum cleaner) Getting in touch... -
Page 6: Getting To Know Your Machine
Instructions Weight 3.29kg Class II regulatory To purchase consumables and requirements. Regulatory Compliance Mark Dust bin capacity 0.5l accessories, please visit vax.com.au/vax.co.nz (RCM) Subject to technical change without notice. Low speed setting on hard fl oors. Images are illustrative only. -
Page 7: Getting Started
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Assembling your 2-in-1 vacuum cleaner Line up fl oorhead with Line up handle with main Insert screw into back of the main body, push fi rmly body and lower into place. handle and tighten with a into place. -
Page 8: Using Your Machine
Using your machine Operating as an upright vacuum cleaner Unplug the charger from Place foot on the fl oorhead and the mains and remove pull the handle backwards to the vacuum from the recline the machine. docking station. To select between fast and Press the ON button on slow suction press the the handle to turn the... - Page 9 Using your machine Operating as a handheld vacuum cleaner Press the handheld release Press the handheld button. Lift to remove the On/Off button to switch handheld from the main body. the handheld on. For a more detailed clean, line up and push the 2-in-1 connector into the handheld nozzle, then push and attach the 2-in-1 tool securely onto the connector.
-
Page 10: Taking Care Of Your Machine
Taking care of your machine Emptying the dirt container CAUTION: Always switch off the vacuum cleaner before carrying out any maintenance or troubleshooting. Press the handheld release Press the dirt container release button. Lift to remove the button to remove the dirt container. handheld from the main body. - Page 11 Taking care of your machine Cleaning the fi lter CAUTION: Always switch off the vacuum cleaner before carrying out any maintenance or troubleshooting. Do not use your vacuum cleaner without the fi lters in place. Press the handheld release Press the dirt container Squeeze tabs to remove fi lter, button.
- Page 12 • Do not replace the battery with a battery of a diff erent type. • If it becomes necessary to replace the battery, contact the Vax Careline on AU: 1300 361 505 / NZ: 0800 800 900 to determine the location of your nearest authorised service agent.
-
Page 13: Let's Talk Technical
Push the other side of the brushbar back into the fl oorhead and refi t the fl oorhead cover. Don’t forget your accessories! AU: www.vax.com.au / NZ: www.vax.co.nz Pre-motor fi lter Model No. VX42F... -
Page 14: What To Do If It Goes Wrong
What to do if it goes wrong Problem Solution • Check the machine is fully charged. Go to ‘Using your machine’. • Check the charger is plugged into the mains and correctly connected to the docking station. Go to ‘Getting started’. Why does my vacuum •... - Page 15 Getting in touch * Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
- Page 16 Distributed by Techtronic Industries Australia Pty. Ltd. 31 Gilby Road, Mt Waverley, VIC 3149 Australia. Careline AU: 1300 361 505 www.vax.com.au Careline NZ: 0800 800 900 www.vax.co.nz...