Herbi 4 Extra - Micron Herbi4 Instruction Manual

HERBI 4 EXTRA

To fit the bottle to the Handle/Valve, fill the bottle to the required level and place it
on a level surface. Fit the Handle/Valve into the bottle ensuring that the bottle handle
is in line with the flow control valve. Tighten the bottle securing cap and pass the air
bleed tube through the bottle handle. This is important to ensure that the air bleed
system functions correctly.
Press lever down (1) for treating small areas. Press down and forward (2) for
continuous spraying. To stop flow, pull back lever and release. N.B. for safety,
valve can be locked in off position by pushing lever forward (3)
When using the backpack connector the airbleed tube must be fitted to the bracket as shown
1
2
2
26
3 3