Tray Fixing Bracket - Jenx Multistander Instructions For Use Manual

S

Tray fixing bracket

Prone to Supine
1
Step 1: Remove the 2 bolts using the allen key provided, as
shown. Ensure that the washer stays on the bolt
2
3
Tray fixing bracket should be
removed when not in use, see
page 29 for instructions on how to
remove.
2
Step 2:
Line up the yellow stickers. This is done by rotating
the bracket as shown opposite
Step 3: Insert bolts (with
washers) and tighten
Multistander
jenx.com
25