Summary of Contents for Jenx Advanced Side Lying Board
Page 1
Version 008 INSTRUCTION FOR USE Therapy Aids Important Information: These instructions must be kept with the product at all times. This product is a prescribed Medical Device. To be used only under the guidance of a Therapist or Prescribing Practitioner. You must read these instructions carefully before use.
Page 2
INSTRUCTION FOR USE Therapy Aids Note: Some fabric and plastic colours may vary, adjustments are not affected. Nursery Table Wedges and Rolls Advanced Side Lying Board Ziggy...
Product Induction & Hand Over ......10 Wedges & Rolls ............23 Specification & Warranty ........11 Maintenance and Inspection Advanced Side Lying Board Maintenance & Inspection ........25 Castors & Back Angle ..........13 Frequently Asked Questions........27 Seat Angle .............. 14 Notes ..............
Page 4
Do not use this product if you suspect or know that it is broken or faulty. Please contact Jenx Limited immediately for advice: Jenx Limited, Tel: +44 (0)114 285 3376.
Page 5
Therapy Aids Key to Components Swiss clip T-Nut Wing knob Allen key bolt Wing nut Star knob Plastic spacer Plastic washer Key for Users Scallop wheel Carers and Re-issue Professional and home users and stores technical users jenx.com...
(see picture), which is located on the product. Please quote this number on all correspondence. Product Labels Each Jenx product has a number of pictorial safety labels attached, these refer to the explanations below. Client weight Limit (changes per model and Attention/ Warning...
Wooden Products and Parts • For deep cleaning a low pressure steam cleaner can be used • Do not use organic solvents to clean Jenx Products • Soap and water or antibacterial spray can be used • Check for breaks or splintering of the wood before re-issuing • ...
Unauthorised accessories may affect the safety of this product and invalidate your warranty • Check that gas spring levers are not bent. Do not use the product if any levers are bent. Contact Jenx Limited to arrange replacement Monthly Checks...
If the product is to be re delivered, ensure adequate and secure packaging is used • If in any doubt as to the safety of this product do not issue it, contact Jenx Limited for advice • Products must only be issued fully assembled, clean and in good working order. Instruction for Use must be with the product Jenx Limited offer Technical User Courses for stores personnel.
Manufacturer and Seller offer this product, and Buyer and User accept it, subject to the foregoing conditions of sale and limitations of warranty and liability, which may not be modified except by written agreement signed by a duly authorised representative of the Manufacturer. jenx.com...
Lock castors before using or adjusting Back angle adjustment Step 1: Loosen the wing knobs; one on each end Step 2: Adjust the angle of the back pad Step 3: Tighten wing knobs: one on each end jenx.com...
Advanced Side Lying Board Seat Angle Step 1: Loosen the wing knobs; one on each end Step 2: Adjust the angle of the seat Step 3: Tighten wing knobs: one on each All belts and harnesses should be used at all times. For therapy purposes it may be necessary to deviate from this rule and any deviation should be fully documented as part of a Risk Assessment or Therapy Program and all relevant staff and carers appropriately trained.
3 inches (7.5cm) on all straps. If strap is not long enough: DO NOT USE PRODUCT. Two straps come with the advanced side lying board as Positioning blocks are supplied with the standard. Both straps must be used at all times. Minimum board to support the user.
Therapy Aids Angle Adjustment Step 1: Undo wing knobs; one on each side Step 2: Adjust the angle of the tray Step 3: Tighten wing knobs; one on each side jenx.com...
Nurery Table Height Adjustment Step 1: Undo wing knobs; one on each side Step 2: Adjust the height of the tray Step 3: Tighten the wing knobs; one on each side Why? Benefits of the Adjustment: The height adjustment allows the table to be set at a height that suits each child. The angle adjustment means that children can use the table as an easel which may help to encourage head control, shoulder protraction and back extension in sitting.
Page 19
Corner Seat using the Velcro straps provided Specification Size 1 (mm) Size 2 (mm) Work area 490 x 300 590 x 280 Angle +/- 40 º +/- 40 º Min. table height Max. table height Pitch between legs jenx.com...
Ziggy offering support and symmetry. A small Ziggy can be used to offer extra extension to children in prone standing. Ziggy is passed under their arms to increase their extension. This helps to improve and support shoulder protraction and to increase extension of the back and often aids head control. jenx.com...
Page 22
CHAPTER FIVE Wedges & Rolls Carers and Re-issue Professional and home users and stores technical users...
Only use on level floor. Keep away from sources of heat or naked flames. Jenx Limited recommends that children are never left unattended whilst using this Medical Device. Children may slip or fall when unattended and may suffer serious injury. It is the sole responsibility of the person caring for a child using this Medical Device to ensure the safety of the child in the Device should they be left alone.
We strongly recommend that all straps and harnesses are replaced with new ones before re-issue. Only genuine Jenx parts should be fitted • Check that gas spring levers are not bent. Do not use the product if any levers are bent. Contact Jenx Limited to arrange replacement •...
Page 26
If there is any doubt about the safety of the product, do not hesitate to contact our Customer Support Department for advice Products should be thoroughly decontaminated in line with MHRA and local guidelines prior to inspection, storage and re-issue Jenx Limited can take no responsibility for re-issue of products...
Medical Devices Management. Check with your authority. Question: Does Jenx run technical competency courses? Answer: Yes. Please visit jenx.com for details of available courses. Question: Why does my tilt-in-space lever not work? Answer: If your lever does not operate properly, ensure that it is fully unlocked and try again. Do not use...
Need help?
Do you have a question about the Advanced Side Lying Board and is the answer not in the manual?
Questions and answers