Safety Straps - Jenx Multistander Instructions For Use Manual

Frequent Adjustments

Safety straps

1
Step 1: Image showing the straps open.
3
Step 3:
Pull the strap to tighten the large velcro
strap around the child
All belts and harnesses should be used at all times. For therapy purposes it may be necessary
to deviate from this rule and any deviation should be fully documented as part of a Risk
Assessment or Therapy Program and all relevant staff and carers appropriately trained. Secure
client with straps before adjusting product. Ensure finger's width between safety strap and client
to prevent over tightening or client moving to inappropriate position. Adjust straps for each client
and changes of clothing. Minimum Velcro® overlap: 3 inches (7.5cm) on all straps. If strap is not
long enough: DO NOT USE PRODUCT.
22
2
Step 2: Fix the child in place using the large velcro
strap
4
Step :
Stick the velcro to the support pad