Table of Contents
Advertisement
Switch Housing
www.CasablancaFanCo.com
1.888.227.2178
Partially install two upper switch housing
Feed the wire plug through the center
Install the third screw, found in
screws, found in the
hardware bag,
hole of the upper switch housing, then
the
hardware bag, then tighten
halfway into the motor housing. It does not
wrap keyhole slots around the screws and
all three screws securely.
matter which two screw holes you choose.
twist counterclockwise.
Make sure the upper switch housing is securely attached
to the mounting plate. Failure to properly secure all 3 assembly
screws could result in the switch housing fixture falling.
15
M6026-01 • 04/16/15 • © 2014–2015 Casablanca Fan Company
Advertisement
Table of Contents
