Remote Operation (Uniden's Wdvr App); Add System To The App; Live Screen/Task Bar - Uniden WDVR4-2 Owner's Manual

REMOTE OPERATION (UNIDEN'S WDVR APP)

Uniden's WDVR App lets you remotely manage and monitor your WDVR system with your mobile device.
You can add or delete cameras, monitor and record live video, play recorded video, take snapshots, and
manage video storage.
Note: View and manage snapshots through your mobile device.

ADD SYSTEM TO THE APP

1. Download the Uniden WDVR app from Apple App Store,
Google Play, or Amazon App Store. Launch the app.
2.
Tap to add your WDVR system. The Device List screen
displays.
3,
Tap in the upper right corner of the screen. The Device Setup
screen displays.
4. Enter a name for your system. Tap Scan QR. Scan the QR code on the bottom of the WDVR
receiver.
5. Enter the default password (123456) and tap Save. The Device
List displays again with your WDVR system listed as the name
you entered previously.
Note: It is strongly suggested that you change the
password to something less common and that you will
remember.
6 Select your device. Connection screen displays.
7
Press and Live video displays. It may take a few seconds to access remote video, depending
on your network environment.
The WDVR system allows a maximum of 3 remote viewers on the system. The fourth connection attempt
will be rejected. When a local user is operating in the Setup menu, remote users are temporarily denied
WDVR access until the local user leaves the Setup menu.
The WDVR system requires a minimum 1.5Mbps connection bandwidth per connection for best
streaming viewing quality. If bandwith is below 1.5Mbps, set camera resolution and quality to Low to
improve streaming remote image quality.

LIVE SCREEN/TASK BAR

The Live screen is divided into as many channels as you have cameras. The WDVR4-2 configuration
contains 2 cameras; therefore, the screen is divided into 2 sections. Tap the screen to display the Live
video task bar. It doesn't matter which section of the screen you tap.
11