Battery Operation; Operating The Cam 250; Record Mode - Uniden CAM250 Owner's Manual

Battery Operation

Although primarily designed for in-car use, the CAM 250 can operate
from its built-in battery for up to 10 minutes.
The power usage length depends on day/night recording and
resolution setting.
The unit charges the battery whenever power is detected through the
USB port. When the unit is being charged, the red LED glows. It will
automatically turn off when the unit has been charged completely. The
unit will take about 90 minutes to charge completely. The Battery Status
icon tells you how full the battery is.
Full
Empty Low Half Full

OPERATING THE CAM 250

The CAM250 operates in three modes: Record mode, Photo mode, and
Playback mode. These modes also have menus to help you configure
recording and taking photos.Press M/ until you access the mode you
want. An icon appears in the upper left corner of the screen for each
mode.
Record Mode Photo Mode Playback

RECORD MODE

To record video, verify that a valid microSD card (not supplied) in
inserted in the microSD slot.
Inserting or removing the microSD card when the unit is recording
causes the device to shut down.
10