Thermador ME301JP Use And Care Manual page 16

Enter the cooking time in hours and minutes. For
3.
instance, for 45 minutes, press the numbers 0 4 5.
Tip: It is also possible to press only two numbers (e.g.
4 and 5) and to confirm with COOK TIME.
The programmed cooking time now appears next to
the symbol:
5RDVW
6HW FRRN WLPH
4. Press START.
The oven starts. At the end of the programmed cooking
time, the oven turns off and a beep sounds. Open the
oven door or press COOK TIME to turn off the beep
sound.
To change the cooking time after the oven has been
started, press COOK TIME. You can then set a new
cooking time.
Tips:
You cannot use Cook Time if a probe (some models)
is being used.
The maximum Cook Time setting allowed in 12-hour
display mode is 11:59 hours or 23:59 hours in 24-
hour display mode. See "User Settings" for changing
the display mode.
Stop Time
Use Stop Time to delay the start of a Cook Time. Enter
the time that you want the mode to end. The oven
calculates the proper start time. It starts and stops
automatically.
CAUTION
To maintain food safety, do not leave food in the
oven for more than one hour before or after
cooking.
To set the Stop Time:
1. Set a Cook Time first.
2. Press STOP TIME.
The oven mode, temperature and the
appear in the display:
5RDVW
6HW VWRS WLPH
16
DP [
³¯ ´¯ ¯¯
ž¯¯
symbol
DP [
³³ ´¯
¯¯
\
³›
ž¯¯
Enter the stop time. For instance, for 12:45, press the
3.
numbers 1 2 4 5.
The programmed stop time now appears next to the
symbol:
5RDVW
ž‚ 6HW VWRS WLPH
4. Press START.
The oven enters delayed mode. The oven turns on
when the start time (in this example, 12:00 pm) is
reached. At the end of the programmed cooking time,
the oven turns off and a beep sounds. Open the oven
door or press COOK TIME to turn off the beep sound.
To change a delayed timed mode without starting the
oven, press STOP TIME. You can then set a new stop
time and change the oven mode and temperature.
Do not use a delayed baking if the oven is already hot.
Tips:
The maximum stop time setting allowed in 12-hour
display mode is 11:59 hours, or 23:59 hours in 24-
hour display mode.
It is also possible to set a stop time without setting a
cook time. Then the oven starts immediately and stops
automatically.
Probe
The probe measures the internal temperature of the food.
The probe is available for Bake, Roast and all convection
cooking modes except Convection Broil.
Placing the probe: Insert the tip of the probe where the
least amount of heat penetrates the meat. The best
location is in the middle and thickest part of the meat.
Make sure the probe is not touching fat, bone, parts of
the oven or pan.
To use the probe:
Insert the probe into the meat as described above.
1.
2. Connect the probe to the oven.
NOTICE To prevent burns, do not attempt to insert the
probe in a hot oven.
3. Set the cooking mode and temperature.
4. Press PROBE.
The default temperature (160º) and the probe icon
appear in the display:
ž‚
³‚
5RDVW
3UREH ƒ
DP [
³³ ´¯ ¯¯
\
³›
ž¯¯
DP
³³ ´¯
ž¯¯
ž‚
ž‚