Check For Leaks; Setting The Hot Water Temperature - Water Filters Australia K-WFADUOGN Owner's Manual

STEP 14

CHECK FOR LEAKS

• C heck all fittings and tube connections to and
from the boiling tank for water leakage.
• I f any leaks are noted ensure they are repaired
before moving onto the next step.
STEP 15
CONNECT TO POWER SUPPLY
• P lug power lead into power supply and switch on
STEP 16

SETTING THE HOT WATER TEMPERATURE

• T urn thermostat dial clockwise to the "MAX"
position as shown.
• T he Status light should glow red, indicating
that the boiler is heating up.
Adesso, Futura
DANGER
WARNING
IMPORTANT
DO NOT LEAVE BOILER UNIT UNATTENDED DURING THIS INITIAL HEATING STAGE.
Power supply
Pressure
Limiting
Valve
1 / " fbsp
2
push lock fitting
Pressure
Limiting
Valve
INSTANT
HOT WATER
1 / " fbsp
2
push lock fitting
DUO