Table of Contents
Advertisement
INSTALLATION PRE-REQUIREMENTS
POWER SUPPLY
• A standard 10amp 3pin power outlet conveniently placed within 1m of the intended location of the
boiler tank. This must be installed by a qualified electrician.
WATER SUPPLY
• A standard cold water supply fitted with a 15mm stop tap situated within easy access of the intended
location of the boiler tank. This must be installed by a qualified plumber and in accordance with local
& state laws.
• A 350 kPa pressure limiting valve is supplied and must be installed.
• W ater supply must be microbiologically safe.
TYPICAL INSTALLATION
• A llow a minimum air space
of 100mm around the
front, sides, and top of the
boiler tank. No clearance is
required at the back of the
boiler tank.
• T he boiler tank must be
situated within 600mm of
the dual faucet.
Mixer Tap
Pressure Limiting
Dual Check
Valve 350kPa
Stop tap
for cold
water
supply
(not
included)
¼" mbsp x ¼"
tube connector
INSTALLATION DIAGRAM
Dual Faucet
Filtered Cold water
to dual faucet (blue tube)
Filtered
Water to
boiling tank
(white tube)
Power supply
Filtered
Hot water
to dual faucet
(clear tube)
Boiling Tank
Advertisement
Table of Contents
