Table of Contents
Advertisement
INSTALLATION
STEP 1
DRILL 35MM HOLE FOR DUAL FAUCET
• Y ou will need to drill a 35mm diameter hole in
the bench top or sink where you would like to
place the dual faucet.
• T he dual faucet must be within 600mm of the
proposed location of the WFA Duo under bench
boiling tank, and filter system (if included).
STEP 2
INSTALLING THE DUAL FAUCET
• I nsert all tubing through the 35mm hole
as illustrated, and lower the faucet into
position.
• T ake care not to damage or kink the tubing
as it passes through the 35mm hole.
• D o not pull on the tubing.
STEP 3
INSTALLING THE DUAL FAUCET
• S ecure the dual faucet into position as
shown in diagram.
Important Notice of Routine
Maintenance and Care
• Do not keep rotating the spout
• O ccasional cleaning of the aerator
is recommended. Use of soapy
water and a soft sponge or cloth is
recommended.
• A void cleaning with chemicals,
solvents or harsh detergents (this
may seriously harm surface area)
• I f used with hard water or water
with very high mineral content, it is
absolutely necessary to clean and
dry faucet immediately after every
use. (Calcium and other minerals
could seriously damage surface
area).
Mixer Tap
35mm
Dual Faucet
O-Ring
Rubber
Washer
Metal
Washer
Dual Faucet
Chrome-plated
Metal Flange
Mounting
Hole 35mm
Locking Nut
Advertisement
Table of Contents
