Table of Contents
Advertisement
ST10CSU2A.
2. Align the 2x ST10CSU2A units either horizontally or vertically, top to bottom.
3. Align the 4 pilot holes on the top and bottom of the 2x ST10CSU2A.
4. Insert the 4 provided Stacking Screws through the bottom of one ST10CSU2A, and
using a screwdriver, firmly secure the screws to the top of the 2nd ST10CSU2A.
Instruction Manual
7
Advertisement
Table of Contents
Need help?
Do you have a question about the ST10CSU2A and is the answer not in the manual?
Questions and answers