StarTech.com 424D-USB-C-CHARGER Series Quick Start Manual

4-Port 240W GaN USB-C Laptop Charger, Desktop/Under Desk Mount
Product ID
424Dxx-USB-C-CHARGER
Package Contents
• Charger (A) x1
• Mounting Plate (Installed) (B) x 1
• M3x4mm (5/32") Phillips Countersunk Machine Screws (Installed) (C) x 4
• M4x12mm (1/2") Phillips Countersunk Wood Screws (D) x 4
• M4x20mm (3/4") Phillips Countersunk Wood Screws (E) x 4
• (Only for 424D3x-USB-C-CHARGER ) S2CEPR3M-USBSL-CABLE (F) x 2
• 6ft IEC-C5 Power Cord (G) x 1
Requirements
For the latest manuals, product information, technical specifications, and declarations of conformance, please visit:
www.StarTech.com/support
• Phillips head screwdriver
• (Optional) Appropriate mounting hardware and tools for the wall type
• (Optional) Power drill with an appropriate drill bit according to the wall type
• (Optional) Pencil or marker
• (Optional) Bubble level
• (Optional) Laptop Cable Lock
Warnings!
• StarTech.com Ltd. is not responsible for any property damage and/or personal injury resulting from the installation procedures
outlined in this technical document.
• The mounting instructions and/or hardware included with this product may not be suitable for the specific wall structure used.
If you lack the necessary expertise required to attach this product to the wall structure or to assess the suitability of the hardware
provided, please contact a professional installer.
• Read the entire Quick-Start Guide and ensure the instructions are fully understood before using this product.
• Never operate this product if parts are missing or damaged.
• Do not touch the product under power if the product has an exposed printed circuit board or electrical wire.
For additional self-service support options and community forums, please visit: www.StarTech.com/support
Quick-Start Guide
Revision: October 8, 2024