Description Of The Control Panel; Preliminary Checks; Controls After Transport; Installing The Appliance - AEG PE4542-M User Manual

Description of the control panel

(page 3 - B)
N.B.: Only icons B6, B7, B8, B9 and B14 concerning the
enabled commands will light up on the control panel.
N.B.: A light touch is enough to activate the icon.
B1. Display: guides the user in using the appliance.
B2. icon to activate or deactivate menu parameter set-
ting mode
B3. icon to turn lights A6 on and off
B4. icon to select the coffee taste
B5. icon to select the type of coffee (espresso, small cup,
medium cup, large cup, mug)
B6. ESC icon to exit the selected mode
B7-B8. icons to scroll forwards or backwards through the
menu and display the various modes
B9. OK icon to confirm the selected function
B10. icon to deliver a cup of coffee
B11. icon to deliver two cups of coffee
B12. icon to deliver steam
B13. icon to deliver hot water
B14. "jug" icon to make a number of cups of coffee directly in
the jug (provided)

PRELIMINARY CHECKS

Controls after transport

After removing the packaging, make sure the product is comple-
te and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services.

Installing the appliance

Important!
• Installation must be performed by a qualified professional
in compliance with legislation in force in the country of in-
stallation (see Built-in installation).
• The packing elements (plastic bags, polystyrene foam, etc.)
should be kept out of reach of children.
• Do not install the appliance in rooms where the temperatu-
re may drop to 0°C or lower.
• Customise the water hardness as soon as possible following
the instructions in the "Setting water hardness" section.

Connecting the appliance

Danger! Check that the mains power supply voltage
corresponds to the value indicated on the rating plate on the
bottom of the appliance.
Connect the appliance to an efficiently earthed and correctly in-
stalled socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified pro-
fessional.
To comply with safety directives, an omnipolar switch with a mi-
nimum contact distance of 3 mm must be installed.
Do not use multiple sockets or extensions.
Important! Safety cutout devices must be included
in the mains power supply in compliance with the installation
regulations in the country concerned.
Disposing of the appliance
In compliance with European directive 2002/96/EC, the applian-
ce must not be disposed of with household waste, but taken to
an authorised waste separation and recycling centre.
9
EN