Table of Contents

Advertisement

FOR PERFECT RESULTS
FOR PERFECT RESU LTS
Thank you for choosing this AEG product. We have
created it to give you impeccable performance for many
Thank you for choosing this AEG pr
years, with innovative technologies that help make
created it to give you impeccable performance for many
life simpler – features you might not find on ordinary
years, with innovative technologies that help make
appliances. Please spend a few minutes reading to get
life simpler – featur es you might not find on or dinary
the very best from it.
appliances . Please spend a few minutes r eading to get
the very best fr om it.
ACCESSORIES AND CONSUMABLES
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you'll find everything you
In the AEG webshop, you'll nd everything you
need to keep all your AEG appliances looking spotless
need to keep all your AEG appliances looking spotless
and working perfectly. Along with a wide range
and working perfectly. Along with a wide range
of accessories designed and built to the high quality
of accessories designed and built to the high quality
standards you would expect, from specialist cookware
standards you would expect, from specialist cookware
to cutlery baskets, from bottle holders to delicate
to cutlery baskets, from bottle holders to delicate
laundry bags...
laundry bags...
Visit the webshop at :
Visit the webshop at:
www .aeg-electr o lux.com/shop
www.aeg electrlux.com/shop
oduct.We have
all measurements in mm
In
R
1
1
8
In
R
1
1
W
7
1
W
R
1

Advertisement

Table of Contents
loading

Summary of Contents for AEG PE 4541-M

  • Page 1 FOR PERFECT RESULTS FOR PERFECT RESU LTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many Thank you for choosing this AEG pr oduct.We have years, with innovative technologies that help make created it to give you impeccable performance for many life simpler –...
  • Page 2: Table Of Contents

    CONTENTS Cleaning the drip tray ............15 Cleaning the water tank ..........16 INTRODUCTION ......... 7 Cleaning the spouts ............16 Symbols used in these instructions .........7 Cleaning the pre-ground coffee funnel ......16 Letters in brackets ............7 Cleaning the inside of the coffee maker ......16 Troubleshooting and repairs ..........7 Cleaning the brewing unit ..........16 Cleaning the milk container ...........17...
  • Page 3: Introduction

    INTRODUCTION N.B.! Symbols used in these instructions This symbol identifies important advice or information for the Important warnings are identified by these symbols. user. It is vital to respect these warnings. Failure to observe the instructions could result in electric shock, Letters in brackets serious injury, burns, fire or damage to the appliance.
  • Page 4: Designated Use

    The manufacturer is not liable for damage deriving from impro- per use of the appliance. Danger! This is an electrical appliance, it is therefore This appliance can be installed over a built-in oven if the latter important to respect the following safety warnings: is fitted with a cooling fan at the rear (maximum microwave •...
  • Page 5: Description Of The Control Panel

    Description of the control panel Installing the appliance (page 3 - B) Important! N.B.! Only icons B6, B7, B8, B9 and B14 concerning the • Installation must be performed by a qualified professional enabled commands will light up on the control panel. in compliance with legislation in force in the country of in- stallation (see Built-in installation).
  • Page 6: Using The Appliance For The First Time

    USING THE APPLIANCE FOR THE TURNING ON AND HEATING UP Each time the appliance is turned on, it performs an automatic FIRST TIME preheat and rinse cycle which cannot be interrupted. The ap- • Coffee has been used to factory test the appliance and it is pliance is ready for use only after completion of this cycle. therefore completely normal for there to be traces of coffee in the mill.
  • Page 7: Changing The Quantity Of Coffee In The Cup

    NOTE 2: If the coffee is delivered too fast and the cream is not the appliance will display “GROUND TOO FINE ADJUST MILL AND satisfactory, see the “Adjusting the coffee mill” section. PRESS OK” and then “FILL TANK”. Check the level of water in the NOTE 3: Tips for a hotter coffee: tank and replace in the appliance. • Proceed as described in the section “Changing and setting To turn the appliance back on, insert the water spout if not al- menu parameters”, “Rinse” function. ready in place (fig. 6), then press the OK icon (B9). “HOT WATER •...
  • Page 8: Adjusting The Coffee Mill

    ADJUSTING THE COFFEE MILL NOTE 5: If more than one measure of pre-ground coffee is used and the funnel clogs, push the coffee down with a knife (fig. 21) The coffee mill is preset in the factory and should not require then remove and clean the brewing unit and machine as descri- adjusting.
  • Page 9: Changing The Quantity Of Milk And Cof- Fee For Cappuccino

    • Remove the lid of the milk container. You should not release the CLEAN button until the bar is • Fill the container with about 100 grams of milk for each complete indicating that cleaning is concluded. cappuccino to be prepared (fig. 23). Never exceed the MAX When the CLEAN button is released, the function stops. level (corresponding to about 750 ml) marked on the con- After cleaning, remove the milk container and place in the tainer.
  • Page 10: Making A Number Of Cups Of Coffee With

    • Press the ESC icon (B6) (fig. 18) twice to exit the menu. is lined up with the spout of the jug. MAKING A NUMBER OF CUPS OF Important! When the coffee beans are insufficient to complete the required function, the appliance stops the process COFFEE WITH THE JUG FUNCTION and waits for the bean container to be filled again and the Using this function you can automatically make a number of cups icon (B14) to be pressed.
  • Page 11: Cleaning

    press the OK icon (B9) to confirm. To remove the tray: 1. Open the service door (fig. 16). • To change the quantity of cups, press the icons (B7) 2. Remove the drip tray and the waste coffee container (fig. and (B8) until “ NR OF CUPS IN JUG” is displayed. 17). • Select the OK icon (B9) and then press the icons (B7) 3.
  • Page 12: Cleaning The Milk Container

    Cleaning the milk container 4. Press the two red release buttons inwards and at the same time pull the brewing unit outwards (fig. 31). Important! Always clean the tubes inside the milk Important! Do not use washing up liquid to clean the container (C) when you prepare milk.
  • Page 13: Cleaning The Coffee Jug

    Cleaning the coffee jug Rinsing Clean the jug with a damp cloth and mild washing up liquid. This function enables you to obtain hotter coffee. Proceed as follows: N.B.: To avoid damaging the appearance of the jug, do • When you turn the appliance on, if you want to make a not wash in a dishwasher.
  • Page 14: Changing Coffee Temperature

    • Make sure the clock on the appliance has been set.• • Press the OK icon (B9). • Press the icons (B7) and (B8) until the number coin- Press the icon (B2) to enter the menu and then the cides with the number of red squares on the test strip (for icons (B7) and (B8) until “ START TIME” is displayed. example, if there are 3 red squares on the test strip, select •...
  • Page 15: Resetting Default Values (Reset)

    yed. To display, proceed as follows: • Empty the tank of water, pour the contents of the descaler • Press the icon (B2) to enter the menu and then the bottle into the tank respecting the instructions given on the icons (B7) and (B8) until “ STATISTICS” is displayed.• descaler pack, then add water up to the MAX level marked Press the OK icon (B9). on the water tank. •...
  • Page 16: Technical Specification

    To turn the appliance off, press the ON/OFF button (A7). The appliance performs the rinse cycle then goes off. N.B.! If the appliance is not used for an extended pe- riod, place the main switch on the back of the appliance in the 0 position (A23). TECHNICAL SPECIFICATION Voltage: 220-240 V~ 50/60 Hz max. 10A Absorbed power: 1350 W Pressure: 15 bars Water tank capacity: 1.8 litres...
  • Page 17: Displayed Messages

    DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY FILL TANK! The water tank is empty or positioned Fill the tank with water and/or insert it correctly, incorrectly. pushing it as far as it will go. GROUND TOO FINE ADJUST MILL AND The grinding is too fine and the coffee Turn the grinding adjustment knob one click alternating with PRESS OK is delivered too slowly.
  • Page 18: Troubleshooting

    TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Custo- mer Services. PROBLEM POSSIBLE CAUSE REMEDY The coffee is not hot The cups were not preheated. Warm the cups by rinsing them with hot water.
  • Page 19 PROBLEM POSSIBLE CAUSE REMEDY The milk does not come out of the milk The intake tube is not inserted or is inser- Insert the intake tube (C4) in the rubber spout (C5). ted incorrectly. washer in the milk container lid (fig. 24). The milk is not well frothed.

Table of Contents