Lock; Arts™. ( Auto.range.transpond.system ) - Vertex Standard VX-264 Operating Manual

locK

In order to prevent accidental channel change or inad-
vertent transmission, various aspects of the CH Selec-
tor knob, Programmable keys, and PTT switch may be
locked. The precise lockout configuration is programmed
by your Dealer.
To activate the key locking, turn the radio off. Then, press
and hold the PTT and SIDE-2 key while turning the radio
on again.
To cancel the key locking, repeat this process.
VX-264 O M
perating anual
arts™
( a
uto
This system is designed to inform the operator when you
and another ARTS™-equipped transceivers and stations
are within communication range using the DCS Encoder/
Decoder.
During ARTS™ operation, when the radio receives an
incoming ARTS™ signal, a short beep will sound and "IN.
SERV" ("In Service") will be indicated on the display
for 2 seconds. If you move out of range for more than
two minutes, your radio senses that no signal has been re-
ceived; a short triple-beep will sound and "OUT.SERV"
("Out of Service") will be indicated on the display for 2
seconds. If you move back into communication range, as
soon as the other station transmits, a short beep will sound
again and "IN. SERV" ("In Service") will be indicated
again on the display for 2 seconds.
)
r t s
ange ransPond Ystem
27