Lock; Arts™/Artsii™. ( Auto.range.transpond.system ) - Vertex Standard EVX-530 Series Operating Manual

locK

In order to prevent accidental channel change or
inadvertent transmission, various aspects of the
CH Selector knob, Programmable keys, and PTT
switch may be locked. The precise lockout configura-
tion is programmed by your Dealer.
To locked out the key locking, turn the radio off.
Now, press and hold the PTT and SIDE-2 key while
turning the radio on again.
To cancel locking, repeat this process.
EVX-530 S O
EriES pErating
M
anual
arts
tm
( a
r
uto ange
This system is designed to inform you when you and
another ARTS -equipped station are within commu-
TM
nication range.
During ARTS operation, when the radio receives
TM
an incoming ARTS signal, a short beep will sound.
TM
If you move out of range for more than two minutes,
your radio senses that no signal has been received;
a short triple-beep will sound. If you subsequently
move back into communication range, as soon as the
other station transmits, a short beep will sound again.
II
arts
tm
( a
r
uto
II
ARTS is an enhanced feature of the ARTS
TM
tem which identifies the radio id's both in and out of
range indvidually using either digital mode, or MDC-
1200 encode/decode in analog mode.
®
)
t s
ranspond ystem
)
t s
ange ranspond ystem
sys-
TM
43