Acard ARS-2018 User Manual page 6

ARS-2018/2018E Manual
Step 5: Set a proper and unique SCSI ID for ARS-2018 (see 2.3.1).
Step 6: Fasten ARS-2018 to the interior of PC with screws.
Step 7: Connect ARS-2018 to the SCSI card with an internal SCSI cable. Be sure to
add a terminator to the end (see 2.4 ).
Step 8: Connect ARS-2018 with 2 power cords to let Mirror Smart work well.
Step 9: After powering on, the system will detect a hard drive named Mirror Smart
2018. Before using it, do HDD partition and format if necessary.
Install ARS-2018E:
Step 1: Prepare 2 SATA hard drives of the same model.
Step 2: Unlock the 2 trays and take them out of ARS-2018E.
Step 3: Put a hard drive into each tray and aim its end to the tray's connector.
Fasten the hard drive with screws.
Step 4: Put the 2 trays back to ARS-2018E and lock them.
Step 5: Set a proper and unique SCSI ID for ARS-2018E (see page 2.3.2).
Step 6: Connect ARS-2018E to the SCSI card with an external SCSI cable. Be sure
to add a terminator to the end (see 2.5 ).
Step 7: Connect ARS-2018E with a power cord.
Step 8: Power on ARS-2018E first and then the PC.
Step 9: After powering on, the system will detect a hard drive named Mirror Smart
2018. Before using it, do HDD partition and format if necessary.
NOTICE:
(1) Be sure to unlock the tray before removing it.
(2) The provided trays are designed for ACARD ARS-2018/2018E/
2019. Do not use any substitutes without ACARD's authorization.
ACARD will not maintain or provide any after service/warranty if
the problem is due to using a substitute.
6