Acard ARS-2018 User Manual page 28

ARS-2018/2018E Manual
5. Update the firmware of Mirror Smart and change the mirror size
Refer to Appendix 2.
6. OS didn't detect Mirror Smart's hard drives
l
Confirm if the SCSI card has been correctly installed (see the following
steps 1 to 3).
l
If the installation of driver is correct, confirm if Device Manager has
detected the disk of Mirror Smart (see step 4).
l
If the hard drive is new, initialize, partition and format it with the disk
management tool (see step 5).
Step 1. Right-click "My Computer" to choose "Manage".
Figure 4-1
28