Acard ARS-2018 User Manual page 37

The main items in "Mirror Smart Setup" are explained as follows.
1.
2.
3.
4.
5.
6.
1. The system will produce a warning and show a message when the fan is
malfunctioned.
2. The system will adjust the speed of fans automatically according to the warning
temperature.
3. The alarm will be triggered to warn the system administrator when RAID
becomes abnormal.
4. Each hard drive's data will be read for one minute to prolong the drive's life.
5. Automatic comparison after data rebuilding.
6. The buzzer will be triggered to warn the system administrator when the system
becomes abnormal.
7. The speed limit of the SCSI bus.
8. The speed of data rebuilding
9. If the system temperature is over the set level, there will be an alarm and a
blinking on the screen to warn the system administrator, and the warning will
be recorded to the event log.
ARS-2018/2018E Manual
7. 8.
37
9.