The Leds - Acard ARS-2018 User Manual

3.9 Compare : compare the data
It is to compare if the two hard drives' data are the same. During
comparison if there is any data inconsistent, the system will start to rebuild
the remaining data from the primary hard drive to the secondary one.
Once this function is activated, the menu will change to "Stop compare"
automatically so that the system administrator can stop comparing.
4. EVENT LOG : the record of the system events
4.1 Display log : display all records (record limit is 999)
4.2 Erase log : erase all records
4.3 Elapse time : display the uptime since Mirror Smart was turned on
If the system hasn't been restarted over 3 years, the timer will be reset.
5. LOAD DEFAULT : reload the defaults
Once the defaults are restored, the password will be deleted.

3.3 The LEDs

No
A1 A2
A1, B1
B1 B2
A2, B2
Name of LED
1. Steady green light means normal power
supply.
Hard drive 2. Blinking green light means rebuilding.
power /alarm 3. Steady green with blinking red light means
LED a system problem. See troubleshooting.
4. Steady red light means a hard drive is
failed or removed.
Hard drive
The light means busy reading/writing.
access LED
25
ARS-2018/2018E Manual
Indication