4 Replacement Procedures
4.21 SmartCard unit
Removing the SmartCard unit
To remove the SmartCard unit, follow the steps below and refer to Figure 4-35.
1. Peel off the glass tape.
2. Remove the following screw securing the SmartCard unit.
• M2×3C
3. Slide the SmartCard unit in the direction in the figure below to remove it.
4. Peel off the insulator from the SmartCard unit.
SmartCard unit
4-60 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)
4.21 SmartCard unit (SmartCard model only)
(SmartCard model only)
BIND screw
Guide
Figure 4-35 Removing the SmartCard unit
×1
Insulator
M2×3C BIND
Glass tape