Subtest 7 Acceleration Sensor - Toshiba TECRA A9 Series Maintenace Manual

3 Tests and Diagnostics
Press the Toshiba Presentation button after the following message appears.
Step2
Press Function button (Presentation button)
OK message appears in the display if the test ends without an error.
Press any key return to each Steps if NG! or Press any key message apprears.
If the test ends successfully, the display returns to the ONLY ONE TEST
menu.

3.20.7 Subtest 7 Acceleration sensor

This subtest detects and corrects the each axis (X, Y, Z).
NOTE: Make sure that this subtest is executed on the following condition:
1. Flat desk with vertical plane to get the stability of machine.
2. The vertical wall or plane is necessary.
3. Prevent the machine from shake or shock.
<Example>
Set the machine
against the vertical plane
with the Front upward
Flat desk
The figure below shows the name and position of each side.
3-46 [CONFIDENTIAL]
X 1 2
* * *.
Vertical plane
TECRA A9(S5/P5/S200) Maintenance Manual (960-633)
3.20 ONLY ONE TEST