Lexmark X543 Series Service Manual page 51

User status and attendance messages (continued)
User primary message Explanation
Load Manual
<custom string>
Load Manual
<size>
Load Manual
<type> <size>
PJL ST Message
Remove Paper ADF
Remove Paper
Standard Bin
Remove Packaging
Material
Unplug and Change
Mode
Replace Black Imaging
Unit
Replace Color Imaging
Unit
Replace <color>
Cartridge
Unsupported Mode
Unsupported USB
Device, Please Remove
Unsupported USB Hub,
please remove
30.xx <color> Toner
Cart Missing
Printer does not detect media meeting the description <custom string> in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
Printer does not detect media meeting the description <size> in the single sheet
feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
Printer does not detect media meeting the description <type> and <size> in the single
sheet feeder (manual feeder).
The following actions can be taken:
• Load paper and the job continues.
• press Select ( ), and choose an alternate source for media.
• Cancel the current job.
Try one or more of the following:
• press Select ( ) to clear the message, and continue printing.
• Wait for the message to clear.
This posts when there is paper detected in the ADF upon POR or when the cover is
closed (or any other situation that re-inits the scanner). Message clears when paper
is removed.
The standard output bin is full or nearly full. Remove the media from the bin.
Packaging material is detected by the printer. Remove the packaging material and
press Continue.
Camera is not in a proper mode to use the PictBridge feature. Unplug the camera
cable to the printer, and change the camera mode.
Replace the Black Imaging Unit.
Replace the Color Imaging Unit.
Replace the toner cartridge of the indicated color. The printer continues after the
toner door is closed.
Camera is not in a proper mode to use the Pict Bridge feature. Unplug the camera
cable to the printer and change the camera mode.
Remove the unrecognized device from the USB port on the front of the printer.
Remove the unrecognized USB hub/device from the USB port on the front of the
printer.
The specified toner cartridge is missing. Re-install the missing toner cartridge to clear
the message, and then continue printing. If the message recurs remove and re-install
the cartridge. Listen for the click to ensure the cartridge is installed properly. Close
the front cover.
7525-xxx
2-7
Diagnostic information